How To Remove A Rear Window From A Car

How to Remove a Rear Windshield

by Kimberly Johnson

on reflection epitome by kenny123 from Fotolia.com

Although many people refer to the back glass on a vehicle as the rear windshield, the proper term for it is the back light, since information technology doesn't actually deflect wind. The back light is installed and removed in exactly the same way as the windshield on the front of the vehicle. About vehicle back lights should be removed by professional auto trunk or glass repair professionals. Yet, if you are restoring an older vehicle, you lot may need to perform the chore yourself.

Step 1

Wrap a wash textile around the handle of a trim removal tool to prevent the handle from scratching the drinking glass as you remove it.

Pace 2

Place the hooked bract of the trim removal tool flat confronting the glass at the upper right corner. Push it upward until the hook slides under the metal trim at the elevation of the glass.

Step iii

Rotate the handle of the tool one or two degrees to the left so that the hooked function of the blade can grasp the clips nether the trim better.

Step 4

Slide the trim removal tool to the left until you feel resistance, which ways information technology has hooked onto a prune. Rotate the handle of the tool downward toward the center of the glass until you hear a pop, indicating that you accept dislodged the clip.

Step 5

Slide the tool to the left, repeating the same motions each time you come across a prune until yous accomplish the other side of the glass. Echo the aforementioned procedure to detach the clips from the left, right and bottom of the glass. Pull the loose metallic trim off the vehicle.

Pace 6

Place the blade of a utility knife at the upper left corner of the drinking glass in the location that was previously covered past the metal trim. Movement the blade all the way effectually the perimeter of the glass to cut the seal that holds it in identify.

Footstep seven

Insert the blade of a common cold knife at the upper right corner of the drinking glass with the curved bract facing down. Pull down on the main handle of the pocketknife until the blade slips under the glass. Keep the main handle perpendicular to the drinking glass.

Step viii

Move the T-shaped handle of the cold knife to the left of the main handle until it is straight out to the side. Concur onto the main handle to provide stability and pull the T-shaped handle to the left to cut the seal that is under the edge of the glass. Echo the procedure on all sides of the glass.

Enquire another person to get inside the vehicle and have them push button on the height eye of the glass to pop it out. Grasp the edge of the glass from outside the vehicle and pull it away.

References

Tips

• You can also cut through the seal with tools such as a windshield chisel, a windshield scraper or a windshield pocketknife.

Things You'll Demand

• Launder cloth
• Trim removal tool
• Utility knife
• Cold pocketknife

Writer Bio

Kimberly Johnson is a freelance writer whose articles have appeared in various online publications including eHow, Suite101 and Examiner. She has a caste in journalism from the University of Georgia and began writing professionally in 2001.

More Articles

Source: https://itstillruns.com/remove-rear-windshield-7273201.html

Posted by: scottofirther73.blogspot.com

Share this post